Pregnancy Strip Test

1. For in vitro diagnostic use only
2. Use each test only once
3. Do not use test kit beyond its expiration date
4. Always keep away from direct sunlight, moisture, heat and children

TestCountry Strip Pregnancy Test Instructions:

TEST PROCEDURE

STEP 1 Bring the tests pouch to room temperature (18-28°C). To begin testing, open the sealed pouch by tearing along the notch. Remove the test from the pouch.

STEP 2 Immerse the strip into the urine sample with the arrow end pointing towards the urine. Do not immerse past the MAX (Marker Line). Take the strip out after 3 seconds and lay the strip flat on a clean, dry, non-absorbent surface (such as the mouth of the urine container).

STEP 3 Wait for colored bands to appear. Depending on the concentration of hCG in the test specimen, positive results may be observed in as little as 40 seconds. However, to confirm negative results, the complete reaction time of 5 minutes is required. Do not read results after more than 10 minutes.

INTERPRETATION OF RESULTS Negative - Not Pregnant: Only one color band appears in the control region. No visible band on the test region. This indicates hCG concentration is not present in urine or too low for detection. Positive - Pregnant: Distinct color bands appear on the control and test regions. Presence of both test line and control line indicate that you are pregnant. The color intensity of the test bands may vary since different stages of pregnancy have different concentrations of HCG hormone. Invalid - Uncertain Results: No visible bands in the control and test regions. Repeat with a new test kit.

1. PRECAUTIONS For in vitro diagnostic use only. 2. Use test only once. 3. Do not use test kit beyond expiration date. 4. Always keep away from direct sunlight, moisture, heat and children

Vitro-Diagnostic Use Only - For use by health care professionals