My Allergy Test - Airborne & Food Allergies

My Allergy Test is a great way to determine just what is causing those annoying allergy symptoms from the comfort of your own home. When exposed to ten different allergens, your body's response will be tested to find out which is the culprit. The common allergens tested for are Timothy grass, short ragweed, Bermuda grass, Mountain cedar, alternaria (mold), milk, egg white, wheat, cat and dust mites.

With the test kit, all you need to do is collect a finger stick of blood and then send it off to our laboratory. You'll receive your results within a few days!

The American Academy of Allergy, Asthma and Immunology declares that allergies affect 1 out of 5 people. The first step to better allergy care is to know the cause of your allergy symptoms. Our allergy tests help you find out the cause of your allergy.

MyAllergyTest is the one and only home allergy test to help you find the cause. It meets the strictest requirements of today's laboratories in terms of accuracy and reproducibility.

MyAllergyTest measures your body's response to the ten most common allergens with only one small sample. Those allergens are: Pollens (Timothy Grass, Short Ragweed, Bermuda Grass, Cat, Mountain Cedar), Mold (Alternaria), Foods (Milk, Egg White, Wheat), Other (Cat, House Dust Mite).
*Fast and convenient - results available within a few days after a sample is received at the laboratory. Results sent via email or US mail directly to the consumer *Easy to use - requires just a finger stick of blood (4-5 drops), which is then mailed to the lab for analysis Click here to see how MyAllergyTest kit works? *FDA Cleared *Privacy - identified only by the Personal Identification Number (which comes with the kit) *Cost effective - Replaces the expensive laboratory tests at the comfort of your home *Reliable - You can count on the accuracy of the test as determined by clinical studies. Test results are very easy to understand *Hard-copy record of test results can be made available by letter or e-mail

How Does MyAllergyTest Work?

Top of Form

The MyAllergyTest is a home blood collection kit and mail-in testing service, used to determine if you have allergies to 10 of the most common allergens: Timothy Grass, Egg White, Bermuda Grass, Milk, Mountain Cedar, Wheat, Short Ragweed, Cat, Alternaria (mold), House Dust Mite. The blood sample is analyzed using the MyAllergyTest System, a test performed in a licensed laboratory.

• Step One: GET PREPARED. Get to know your MyAllergyTest Kit. Make sure your kit has all of the kit components identified in the directions. Also, read the directions very carefully. If after you have read the directions you are still unsure about how to stick your finger, call the MyAllergyTest help line (800- 807-1968). You should also make sure your Registration Card and Personal Identification Card are filled out properly. The MyAllergyTest Laboratory must receive your Registration Card and your blood sample within 10 days of blood collection. Please write in the date of blood collection on the Registration Card. Finally, wash your hands with soap and warm tap water (not hot). Dry your hands thoroughly.
• Step Two: GET A BLOOD SAMPLE For best results, collect the blood sample before eating or several hours after a meal. High fat meals may affect results. Using the safety lancet provided, you prick your fingertip and place drops of blood into the staw of the blood Collection Tube. Keep collecting blood until the blood reaches the lower edge of the label on the Blood Collection Tube. You will need about 4 to 5 drops of blood.
• Step Three: ATTACH THE BAR CODE LABELS Attach Label 1 to the Personal Information Card. Keep this card in a safe location. You will need your PIN (Personal Identification Number) to get your test results from the Internet. Attach Label 2 to the Registration Card. Write your name on Label 3 and attach it to the Blood Collection Tube, so that the bar code and number ends are back to back, as seen in the picture. Attach Label 4 to the pre-addressed Foil Shipping Envelope.
• Step Four: MAIL YOUR BLOOD SAMPLE Check your Blood Collection Tube. Make sure it is fully closed and that Label 3 is attached to it. Leave the small paper towel in the Bubble Wrap Envelope. Put your Blood Collection Tube into the Bubble Wrap Envelope, and seal well. Put the Registration Card and the Bubble Wrap Envelope in the Foil Shipping Envelope, and seal well. Place in any US mailbox as soon as possible. The MyAllergyTest Laboratory must receive your Registration Card and your blood sample within 10 days of blood collection.
• Step Five: OBTAIN YOUR RESULTS After sending your blood sample in for testing using the enclosed self addressed mailer, you will receive an email with directions to view, download, and print your test results. You must always provide the unique Patient Identification Number included in your test kit, to obtain your results. Results are available online 7 days a week, 24 hours a day and may be mailed to the address on the Registration Card.

Bottom of Form

What does it mean for a drug sample to have FDA (Federal Drug Administration) approval?

What does "FDA Approved" mean?

What are the allergies?

What allergens are usually tested with the allergy tests?

Who should do the allergy tests?

What is the importance of allergy tests?