Integrated E-Z Split II Key Drug Test Cup 10 Panel (COC/AMP/mAMP/THC/OPI/ PCP/BAR/BZO/MTD/MDMA)

The E-Z Split Key10 Panel Multi Drug Test Kit can detect 10 different widely used drug types at once. This drug testing kit is in the form of a cup that is completely self-contained, meaning that no urine handling is required. The drug test cup is the test itself. This product has several tamper protection features to ensure both the samples and results are reliable. Results available in minutes. Perfect for use on men and women. Drug screening ability and accuracy is very high and due to its design, it is very hard to cheat this drug test by using general drug beating remedies in the market.

SPECIMEN COLLECTION AND PREPARATION FOR EZ Cup

Urine Assay

The urine specimen must be collected in a clean and dry container. Urine collected at any time of the day may be used. Urine specimens exhibiting visible precipitates should be centrifuged, filtered, or allowed to settle to obtain a clear specimen for testing.

Specimen Storage

Urine specimens may be stored at 2-8°C for up to 48 hours prior to testing. For prolonged storage, specimens may be frozen and stored below -20°C. Frozen specimens should be thawed and mixed well before testing.

MATERIALS

Materials Provided

•  Integrated E-Z Split Key™ Cup with multi-drug card

•  Key *Security seal label

•  Package insert Materials Required But Not Provided

•  Timer

•  External controls

DIRECTIONS FOR USE

Allow the test card, urine specimen, and/or controls to equilibrate to room temperature (15-30°C) prior to testing.

•  Bring the pouch to room temperature before opening it. Remove the cup from the sealed pouch and use it as soon as possible.

•  Donor provides specimen and secures the cap by pressing down on all three corners.

•  Technician checks cap for tight seal. Technician dates and initials the security seal and attaches the security seal over the cup cap.

•  On a flat surface, technician pushes key to a fully closed position. 5. Peel off the label on the multi-drug test card to view results. The test is read in the reaction well.

•  Start the timer and wait for the red lines to appear. The results should be read at 5 minutes. Do not interpret results after 10 minutes. See the illustration below. For detailed operation instructions, please refer to the Procedure Card.

INTERPRETATION OF RESULTS

NEGATIVE:

Two lines appear. One red line should be in the control region (C), and another apparent red or pink line adjacent should be in the test region (Drug/T). This negative result indicates that the drug concentration is below the detectable level.

*NOTE: The shade of red in the test line region (Drug/T) will vary, but it should be considered negative whenever there is even a faint pink line.

POSITIVE: One red line appears in the control region (C). No line appears in the test region (Drug/T). This positive result indicates that the drug concentration is above the detectable level.

INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test using a new test panel. If the problem persists, discontinue using the lot immediately and contact your local distributor.

 

Procedure Card (instructions with pictures)
PDF version: Integrated E-Z Split Key Cup.pdf
JPEG version: Integrated E-Z Split Key Cup.jpg

If the PDF version cannot be opened becuase of a missing PDF reader, you can install one of the PDF readers on your computer:

• Adobe Acrobat Reader (~20 MB, for Windows and MacOS)
• Foxit Reader (~1.5 MB, for Windows)