Bacteria in Water Testing Kit

PROFESSIONAL BACTERIA IN WATER TEST KIT

Our Bacteria in Water Test Kit (patented) is designed to detect dangerous bacteria in your drinking water. The test kit offers two (2) types of analytical methods. Method 1 (self-test) simply involves counting the num- ber of colonies that are growing on the petri dish 48 hours after sampling and then comparing the value with the enclosed chart. Method 2 (optional) involves sending the petri dish to our lab for a more detailed analysis, which will identify the type of bacteria present in your water. Note: all sampling methodologies are subject to the occurrence of false negative and false positive results.

DIRECTIONS 1.Remove petri dish from the plastic bag and lay it on a level surface with the lid side up. DO NOT TOUCH the inside of the petri dish or expose it to the outside until you are ready to use it. 2. Completely fill the 1ml pipette/dropper with sample water, place the test sample water into the bacteria medium bottle. Recap the bottle and invert twice to mix the sample water with the medium. Do not shake. 3. Lift the lid of the pretreated dish and pour the mixed bacteria medium into the dish bottom. Replace the lid and swirl gently until the bottom is completely covered. Allow to harden for 1 hour on a level service. 4. Incubate the dish at room temperature for 48 hours.

DETERMINING RESULTS USING METHOD 1 (SELFTEST) After incubation period of 48 hours, count the number of colonies (dots on the petri dish). Bacteria colonies appear solid-looking. The colonies may be very small or may spread considerably. They may be colorless, whitish, or a variety of colors. Refer to the chart below to determine the results of your test. Recheck the dish at 72 hours to be sure that no slow growing bacteria where overlooked.

1. ANALYTICAL METHOD 2 (OPTIONAL)After conducting the self test, replace the lid and seal around the edges of the petri dish with tape (clear, electrical duct tape). 2. Completely fill out the information form (analysis can not be conducted unless you submit all of the information requested)

STANDARD LAB RESULTS Our Professional Bacteria in Water Test Kit requires a $30 lab fee. Place the petri dish in a padded envelope or box along with the information form, and a check, money order (made payable to PRO-LAB ) or a credit card voucher for $30 (Visa, MasterCard, AMEX or Discover only). Mail immediately (within 24 hours of replacing the lid). Send the sample to PRO-LAB, 1675 N. Commerce Parkway, Suite 100, Weston, FL 33326. Within two weeks after PRO-LAB has received your sample, we will send you an easy to read evaluation indicating the exact count and type of bacteria present.

EXPRESS FAX SERVICE Express Service is available for an additional $15. In order to use the express service, you must send the sample, the information form and proper payment to PRO-LAB using an overnight shipping company such as Federal Express, Airborne Express or UPS. Send the sample to PRO-LAB, 1675 N. Commerce Parkway, Suite 100, Weston, FL 33326. (An express sample can only be received Monday - Friday). Within 72 hours of our receipt you will receive your faxed results